Neozed Switchfuse
Switch disconnector Fuse is a device which combines the functions of the switch and of the fuse D0. The system enables the following advantages of protection in comparison with the fuse D0:
- The changing of the fuse link without danger of direct touch of parts under voltage.
- Snap-on mounting on rail according to VOK 50022 and DIN EN 60715.
- The complete protection against touch according to VBG 4.
- The possibility of connecting supply from the upper or from the lower side.
- It can be used as a main switch and tariff fuse in a single device.
- Possibility of sealing in ON or OFF positions with or without fuse-link.
Technical Data |
Standards |
VDE 0638/09.81, EN 60 947/12.92, DIN VDE 0113, DIN VDE 0110 |
Number of poles |
1P, 1P+N, 2P,3P,3P+N |
Rated Voltage |
230/400V a.c. 110V(2P)d.c. |
Rated Breaking Capacity |
50kA |
Rated Insulation Voltage |
400 V |
Rated Impulse Resistance Voltage |
8000 V |
Category of use to DIN VDE 0638
Category of use to DIN E 60 947-3 |
AC 22(63A), AC23(35A), DC 22(63A) |
Temperature of environment |
-5C to/bis + 40C |
Air Humidity |
90% |
Degree of Protection |
IP 00 according to DIN 40 050
IP 20 when mounted in distribution board |
Connection Clamps |
Up to 35mm 2 (multiwire conductor) with screw + - |
Possibility of sealing
|
In ON or OFF |
|
|
|
|
|
 |
