NH Fuse "gG" - general purposeThe body of the fuse-link is made of quality steatite which is highly resistant against temperature overloads. In the inner part of the steatite body there is a copper melting element which is welded on a specially shaped inner part of the contact knife by spot welding. By careful shaping of this part we achived that during assembly the melting element is placed exactly into the middle of the inner place. The remaining inside place of the ceramic body is filled up with precisely determined granulation and chemical structure quarz sand. All contact knives are additionally protected with a layer of silver or on special order of nickel. On the base of cyclic tests we have proved that the fusing characteristics are very stable and the tolerance on the current axis can be up to ± 10%. |
 |
|
NH Fuse"aM" - motor protectionFuse-links with aM characteristics are intended for protection of switchgears and controlgears as well as motors in motor drives where gG characteristics do not comply with all requirements of succesful protection of these devices. They are made in all standard NV sizes from 00 to 4a for all standard rated currents and for voltages to 690 V. Their main duty is to enable a full usage of switchgears and controlgears in the region of starting currents and to prevent sparking or descruction of protective contacts in case of short-circuit currents. It should be noted that these fuse-links are intended only for protection in the limited region (in the region of short-circuit currents). |
 |
|
NH Fuse "aR/gR" - semi conductor protection (Superflink)ULTRA QUICK - SEMICONDUCTOR PROTECTION: ETI fuse-links for semiconductor protection ULTRA QUICK present an optimal solution for protection of power semiconductors, such as diodes, thyristors and other power semiconductors in DC and AC power applications such as AC/DC, DC/AC, DC/DC converters and frequency converters. ETI fuse-links elements for semiconductor protection comply with IEC 60269 and VDE 0636 standards
|
 |
|
| Fuse Blade Link/Fuse Extractors also available |
 |
 |
