| mGard Trapped Key Interlocks |
|
| |
|
S - Panel Mounted Key Switch
The S is a key switch suitable for isolation or switching current. The S unit may be used to isolate power to machinary. The standard sequence of operation is: Key trapped - Power on, Key free - Power off.
|
|
|
|
SE - Surface Mounted Key Switch
An enclosure mounted key switch suitable for isolating or switching current. The SE may be used to isolate power to machinery. The standard sequence of operation is: Key trapped - Power on, Key free - Power off.
- Direct drive operation - positively opens contacts
- 20A, 32A, &63A switches available as standard
- 4NO or 2NO/SNC contact arrangements available as standard
- UL and CSA switches available upon request
- Enclosure sealed to IP66
- Metal enclosure sealed to IP40 available upon request
|
|
FLP Flameproof Key Switch
A key operated rotary switch for use in areas where explosive/flammable gases or dust particles may be present and is usually used for electrical isolation. The standard sequence is power on - key trapped. Once the key is turned and removed the power source is isolated and the key can be taken elsewhere
- BASEEFA(ATEX Directive 94/9/EC Certification - July 2003)
- EExdllC T6 Zones 1 & 2
- Direct drive operation - positively opens contacts
- 16A switch available as standard
- 4 NO or 2 NO/2NC contact arrangements available as standard
|
|
|
|
SS Solenoid Controlled Switch
The SS is a solenoid controlled key switch suitable for panel mounting. An alternative enclosure version is available for surface mounting. The device is used where key/keys need to remain trapped until an electronic signal has been received. Units can be manufactured to accommodate up to 7 keys trapped in a single solenoid. Normally supplied for vertical mounting. Horizontal mounting units are available upon request. |
|
SLS Solenoid Controlled Switch Unit
A panel mounted solenoid controlled key release station. The device ensures that keys may not be released until both the solenoid has been energised and the control power has been isolated. It is supplied with dual channel circuitry and a mechanical override system that is used in the event of a power failure
- Solenoid available in 24V DC or 110 Vac
- Suitable for machines with a rundown cycle
- Extendable units up to 6 release keys
- 10A switch available as standard
- 4 NC/2NO contact arrangements available as standard
|
|
|
|
BM2 Multiple Interlock Deadlock
A robust, multiple modular mechanical bolt interlock that is used to interface with power breakers, valves, earth switches etc. It is used where hazards need to be indirectly interlocked. Available with up to 10 modules BM is unsuitable for use as an access lock. The standard sequence of operation is: Primary Key Free - Secondary Key Trapped - Bolt Shot. This product is also available steel, BMS.
- Horizontal and vertical mounting
- 16mm Diameter bolt with 16mm of travel
- Extend or trim down units and use surplus modules elsewhere
|
|
BM1 Single Interlock Deadlock
A robust, multiple modular mechanical bolt interlock that is used to interface with power breakers, valves, earth switches etc. It is used where hazards need to be indirectly interlocked. Available with up to 10 modules BM is unsuitable for use as an access lock. The standard sequence of operation is: Primary Key Free - Secondary Key Trapped - Bolt Shot. This product is also available steel, BMS.
- Horizontal and vertical mounting
- 16mm Diameter bolt with 16mm of travel
- Extendable Bolt Length
|
|
|
|
BM1-S Single Deadlock Switch
A robust single key deadlock with a 16mm dia bolt. This device is fitted with a limit switch to provide electrical indication of the bolt position. This product is unsuitable for use as an access lock. The standard sequence of operation is: Key free - Bolt shot.
- Bolt travels 16mm
- Available in full stainless steel
- Extendable bolt length
- Switch rating: I 3A 240V(AC15)
- Contact arrangement: 1NO/1NC
|
XM - Modular Key Exchange Box
The XM is a modular mechanical key exchange unit that is used to exchange one or more keys for a number of other keys. This device forms the link between isolation devices and access locks. Any combination of isolation / access keys are possible.
- Tested to over 1,000,000 operations
- Sequential or Non-sequential key operation
- Easy to configure
- Extend or trim-down units and use surplus modules elsewhere
|
|
|
|
XMS Full Stainless Steel Modular Key Exchange Box
A modular. mechancial key exchange unit that is used to exchange one or more keys for a number of other keys. This device is the full stainless steel alternative to the XM product and is ideally suited to high frequency applications and ardous environments
- Patented sequencing system
|
|
XMR-P Modular Key Exchange Units with Rotary Switches Panel (sealed)
The XMR is a modular key exchange unit. These units are fitted with rotary switch(es) that can be used for power or control isolation.
- Panel or enclosure mounting
- Sequential or non sequential key operation
- Any combination of isolation/access keys possible
- Colour coding of locks and keys available
- 20A, 32A, 63A or 150A switches
- 4NO or 2NO 2NC Switch contacts
|
|
|
|
XMR-E Modular Key Exchange Units with Rotary Switches Enclosure (sealed)
The XMR is a modular key exchange unit. These units are fitted with rotary switch(es) that can be used for power or control isolation
|
|
DM1 Single Panel Door Interlock
A robust, modular access interlock for use on all types of doors. The stainless steel head provides rotational adjustment of 360 degrees at 90 degree increments with +/- 5 degree fine adjustments.
- 8 Head configurations with +/- 5 degree of fine adjustment
- Tamper resistant head mechanism
- Extend or trim-down units and use surplus modules elsewhere
|
|
|
|
DM2 Multiple Modular Panel Door
A robust, multiple modular access interlock suitable for use on all types of doors. Sold as a single or multiple door interlock, it is available with up to 10 CL/ML lock modules. A choice of 4 actuators are available dependent upon your application requirements.
|
|
Actuators DM-F (Fixed)
- Supplied as standard
- Ideal for most guard doors
- Compact (fits within DM body's space envelope)
|
|
|
|
Actuators DM-H (Handle)
- Suitable for use where secondary action is required to open/close the guard
- Detent holds actuator in place when door is open
- Vertical adjustment: +/- 6mm
- Rotational adjustment of bracket to suit all mounting orientation
|
|
Actuators DM-S (Self aligning)
- Ideal for small radius hinged doors
- Can be bolted through from the front, top or bottom
- Horizontal/Vertical adjustment
- Rotational adjustment: any angle 360 degrees
- Adjustment ideal for guards subject to misalignment through wear
|
|
|
|
DM-C (Compressible)
- Ideal for doors where the final location can vary (e.g. sealed doors)
- Can be used on small radius doors
- Suitable for situations where the door is likely to be slammed
|
|
DMS Full Stainless Steel Single Panel Door Interlock
A robust, modular access interlock suitable for use on all types of doors. DMS is available with a choice of 4 actuators dependent upon your application requirements
-
Full Stainless Steel
-
8 head configurations with +/-5 degrees of fine adjustment
-
Tamper resistant head mechanism
-
Extend or trim-down units and use surplus modules elsewhere.
|
|
|
|
DMS2 Full Stainless Steel Multiple Panel Door Interlock
A robust, multiple modular access interlock suitable for use on all types of doors. Available as a multiple door interlock with up to 5 CLS/MLS lock modules, DMS offers a choice of 3 actuators
-
8 Head configurations with +/- degree of fine adjustment
-
Tamper resistant head mechanism
-
Extend or trim-down units and use surplus modules elsewhere
|
|
ALS Panel Door Interlock with Switch
A stainless steel access interlock featuring a control switch. Ideally suitable for whole body access applications. Releasing the key operates the switch and allows access to hazardous areas.
- Available in 2 orientations: RE & LE
- Self Aligning bolt as standard
- Reverse sequences available on request
- Lock-out facility available as an optional extra
- Suitable for fast and frequent application
- Provides a safety key for the operator (preventing accidental restart)
- Switch rating: 10A as standard
- Contact arrangement: 2NO/2NC
|
|
|
ET Electronic Time Delay Unit
An electronically operated time delay unit that releases keys at the end of a pre-determined time period. This device is suitable for use in applications that have a run down cycle.
- Available in 110V or 230 V versions
- 0 - 5 min & 0 - 30 min time delays available
- Releases up to 3 Keys
- Complete with solenoid monitoring contacts as standard
- Panel mounted version available
- Rotation & temperature sensing versions also available
|
| |
